Updated onJanuary 11, 2025
The power button, located in the central part of Aidlab, also serves as an LED indicator for various Aidlab states:
| LED Color | Aidlab State |
|---|---|
| Blue | System has initialized correctly |
| Green | Aidlab is worn correctly and collecting data |
| White | Aidlab is not worn or worn incorrectly |
| Purple | Recovery mode |
| Yellow | Low battery |
The green or yellow LED color depends on Aidlab's battery level:
| LED Behavior | Aidlab State |
|---|---|
| Quick pulsating | Searching for a device to pair with |
| Slow pulsating | Paired |
It is possible to change the LED brightness by following these steps:
Open Aidlab Developer Debug Tool in Google Chrome.
Type connect in the console.
Find and select your device (Aidlab).
Use the following commands to adjust the brightness:
set led_brght 1 - Turns off the LED completely.
set led_brght 2-8 - Reduces the LED brightness and lowers its frequency.
Press Enter to apply the changes.
Got any technical questions? Our support agents hang out on LiveChat.
Chat with agentAidlab™ is a registered trademark. Copyright © 2025
