Recovery mode

Updated on14 sierpnia 2021

If you encounter any issues or unexpected behavior of your Aidlab, especially after a firmware update, recovery mode provides some possibilities.

To enter the recovery mode, press and hold the power button for about 6 seconds, until the LED color changes to purple.

You now have 3 options:

• to diagnose your Aidlab press the power button for 3 seconds. If any problems are found, the LED will temporarily change color to red. Otherwise, it will become green and go back to purple after a few seconds.
• to exit recovery mode you need to reset your Aidlab. In order to do that, press the power button and hold for about 10 seconds. After releasing the button, the LED should go back to the normal green pulsating state.
• to restore Aidlab to factory settings press the power button four times rapidly. The LED indicator should turn white. When it changes to green after a few minutes, it is ready for use.

If the diagnosis ended in a red LED indicator or the other options did not help, contact us at contact@aidlab.com.